Sarissa Precision Radar Station Build

After reading these posts on the Too Fat Lardies blog here and here, I decided to take some inspiration (steal ideas) and build my Sarissa Radar Station. Here’s what I came up with.

The Lardies mounted their station on a hexagonal base that was made of carved foam. Knowing how bad I am with foam work, I decided to design my base using Tinkercad and print it using my Printrbot Play. It’s hard to see in this picture, but this print has some very bad horizontal banding (for those that know anything about 3D printing it was caused by a sinusoidal heat fluctuation in the hot end) however it ended up being a happy accident as it kinda gives the effect of marks left by a concrete form.

IMG_20160816_094444

I mounted the hex to a rectangular base and covered the horizontal surfaces with sand.

IMG_20160816_095330

Prior to assembly, I traced the outer ring of the dish and the roof of the shack onto some card stock to use to cover the seams where some of the parts join.

IMG_20160816_101920

Construction of the building was straight forward. Before adding the roof, I painted the interior and added a map, propaganda poster and a calendar to the walls. In hindsight this was a waste as you really can’t see into the building.

IMG_20160816_113034

After the framework of the dish was built I added some mesh using some sort of nylon that probably came from a bag of mints from a wedding. I don’t know what it’s called, but the material is pretty common.

IMG_20160816_133913

To complete the dish I glued some styrene strips along the interior frames and capped the outside with the trimmed card stock ring.

IMG_20160816_145456

Before mounting the building I wanted to finish the base so I added a few things from the parts bin – a box, drum and a bicycle from Dixon.

IMG_20160816_165219

Here are a few shots of the finished base.

IMG_20160820_103042IMG_20160820_103054

And here’s the finished piece. The voltage warning signs are printed images from online, mounted on the scrap pieces that came out of the window panes and the railing is a bent paperclip (both ideas stolen from the Lardies). The steps are from Grandt Line.

IMG_20160823_172426IMG_20160823_172437IMG_20160823_172455IMG_20160823_172505

This was a fun little build of a unique subject and I’m really happy with the results. I’d highly recommend the Sarissa kit if you’re in the market for an interesting objective.

Advertisements

5 responses to “Sarissa Precision Radar Station Build

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: